Print this page
This process is achieved by injecting the molten plastic material mixed with the chemical blowing agent into a mold. This agent produces bubbles in the plastic causing it to foam. This process causes the material to retain its plastic properties but reduces its density causing it to weigh much less. This density reduction gives the material the ability to be stronger in relation the weight while it is not much affected by heat and sound waves.
The key element in this process is low pressure. This allows the melt to flow for a longer distance thus making larger moldings achievable. As the melt enters the mold a thin layer solidifies along the wall while the inside section consists of a cellular foamed structure. The cellular structure allows expansion and contraction to a certain degree while also making it a stronger and longer lasting material.
This can be achieved through two processes. The low pressure process uses special purpose injection molding machines that achieve quality moldings. The machine injects the melted plastic that consists of the gas into the mold to form the material. The other process utilizes blowing agents incorporated into the material. The melt is then charged causing the blowing agent to react to form a gas which consequently foams the plastic.
Thermoplastic injection molding method is preferred since it can use cheaper and lighter molds, has a lower setup and can produce large parts. The use of low pressure means that the materials used in the process should be more economical. As a result, it is highly viable to mass produce the parts.
Contrary to popular belief, high density polyethylene is not the only thermoplastic that can be used though it is the most common due its quality and its chemical resistance property. Other materials include ABS and PPO where stiffness and dimensional repeatability is required. Structural foam does also not have to be black in color. Other colors can be integrated into the material though it requires an extra bit of material to achieve this. GenerallyBusiness Management Articles, this is an excellent method to cater for your packaging and material handling needs.
Tuesday, 12 March 2013 18:57
The Properties Of Thermoplastic Injection Molding
This is a term that is used to describe thermoplastic injection molding components under low pressure. Rather than being a material, it is a process that forms thermoplastic resins to form a rigid material with a relatively hard surface. The injected plastic melt is foamed with nitrogen gas or any other chemical blowing agent that makes it harden.
This process is achieved by injecting the molten plastic material mixed with the chemical blowing agent into a mold. This agent produces bubbles in the plastic causing it to foam. This process causes the material to retain its plastic properties but reduces its density causing it to weigh much less. This density reduction gives the material the ability to be stronger in relation the weight while it is not much affected by heat and sound waves.
The key element in this process is low pressure. This allows the melt to flow for a longer distance thus making larger moldings achievable. As the melt enters the mold a thin layer solidifies along the wall while the inside section consists of a cellular foamed structure. The cellular structure allows expansion and contraction to a certain degree while also making it a stronger and longer lasting material.
This can be achieved through two processes. The low pressure process uses special purpose injection molding machines that achieve quality moldings. The machine injects the melted plastic that consists of the gas into the mold to form the material. The other process utilizes blowing agents incorporated into the material. The melt is then charged causing the blowing agent to react to form a gas which consequently foams the plastic.
Thermoplastic injection molding method is preferred since it can use cheaper and lighter molds, has a lower setup and can produce large parts. The use of low pressure means that the materials used in the process should be more economical. As a result, it is highly viable to mass produce the parts.
Contrary to popular belief, high density polyethylene is not the only thermoplastic that can be used though it is the most common due its quality and its chemical resistance property. Other materials include ABS and PPO where stiffness and dimensional repeatability is required. Structural foam does also not have to be black in color. Other colors can be integrated into the material though it requires an extra bit of material to achieve this. GenerallyBusiness Management Articles, this is an excellent method to cater for your packaging and material handling needs.
Published in
Health
Tagged under
Related items
-
Confronting the Challenge - The Invisible Battles of Cancer Treatment
The journey through cancer treatment is laden with challenges, both visible and invisible. Prof. Mererid Evans from the Velindre Cancer Centre in Cardiff and the cancer and genetics division at Cardiff University shines a light on the harsh realities of battling head and neck cancer, a journey publicly chronicled by Welsh comedian Rhod Gilbert following his diagnosis. Through their shared experiences, a new perspective on cancer treatment and its impacts is unveiled, showcasing...
-
Ligandrol
A SARM with plenty of attention surrounding it is known as Ligandrol. You may hear it called Ligandrol RAD-140 also. It has been used for a long time in medical care for those with osteoporosis and wasting disease.
-
The extraordinary therapeutic properties of CBD
The healing properties of cannabis have been known since ancient times. For this reason, it has been used for many centuries as medicine for various ailments. Cannabis, unlike marijuana, does not contain the narcotic substance THC, which is why you cannot be intoxicated with it.
-
Lose weight effectively with the help of a great app
Many people have made numerous attempts to lose weight which have ended in failure. This leads to feelings of guilt – another defeat is proof that our will is not strong enough to succeed.
-
The power of human touch – origins of body to body massage
We often turn to medicine when searching for a solution to our physical and psychological problems – and of course, it's reasonable.